-
- EN
Gripper sensors MZEKS
MZEKS 25 PSL
Article Number: 204806
Gripper sensors in the series MZEKS have a specially aligned magnetic field for use in grippers. They exhibit a short design and high protection class and impress with the best reproducibility for the T groove.
- Specially aligned magnetic field for use on grippers with T-slots
- Short design
- Fully electronic
- Fully molded electronic circuitry, vibration-resistant
- High reproducibility
- High protection type
Your price: Login
Current-carrying capacity
100 mA, not short-circuit-proof, polarity-safe
Service voltage
10 … 35 V DC
No-load current (max.)
12 mA
Insulation voltage endurance
500 V
Cylinder groove
T-groove, Can be inserted into the groove from above
Mounting
Clamping block
Housing material
Die-cast zinc
Material of cable
Polyurethane
Protection class
III, operation on protective low voltage
Switching output
pnp, NO, short-circuit-proof
Voltage drop (max.)
2 V
Switching capacity
< 3 W (30 V, 100 mA)
Reproducibility
< 0.1 mm
Display
LED yellow - Output signal
Switching frequency
1000 Hz
Ambient temperature during operation
-25 … +70 °C
Temperature range
+70 °C
Protection type
IP 68 (Device and cable) / IP 67 (Connection plug)
Connection
Cable, 2.5 m (flying leads)
Product
Component
Type of groove
To be used for
Scope of delivery
The search found 2 hits
Title
Category
Filetype (size)
Select
Title:
204806_bpz_MZEKS_25_PSL
Category:
Installation Guides
Filetype (size):
PDF
(321.13 KB)
Select: